SmartCarb For Husqvarna TE/WR 250

Name: SmartCarb For Husqvarna TE/WR 250
SKU: SC3-36-HSQ250
Availability: InStock

$649.00

Sharp lines and a smart design ethos. We fit right in!

The all-new 36mm SC3 model SmartCarb replaces the stock Keihin PWK or Mikuni TMX in Husqvarna TE 250 and older WR 250 dirt bikes, offering unparalleled performance, efficiency, and ease of use.

Every SmartCarb ships pre-adjusted specifically for your bike setup. Please provide information in the forms below about any engine/exhaust modifications, how you ride (riding style), and what fuel selection and oil premix ratio you use.

Questions about compatibility, sizing, or fitment? Contact Us!

Products shipping internationally may be subject to import duties/taxes.

SKU: SC3-36-HSQ250 Categories: Offroad 2-Strokes, Husqvarna 2-Strokes

Description

What’s New!

The SC3 SmartCarb replaces the stock Husqvarna TE 250 carburetor.

This isn’t your grandpa’s carburetor. The All-New SmartCarb SC3 brings carburetion firmly into the 21st century. It is a precision air/fuel metering instrument that provides better-than-EFI fuel atomization, precise mixture control, and automatic air density compensation in a single circuit, externally adjustable, jet-less fuel system.

SC3 Upgrades:

Patented CloudForge™ Venturi Design | Optimized signal generation and fuel atomization
Moisture Management | Improved throttle control in extreme humidity
Larger Vent Scoop | Faster float bowl venting/fluid communication
Blended Slide Cutaway | Cleaner off-idle throttle response
O-ring Float Bowl Gasket | Improved sealing and sleeker look
Doubled Fuel Rate | 2X fill passages for quicker float bowl fueling response
“Tucked” Fuel Fitting | Improved fuel line routing
Complete SC3 Design Overhaul | Better fitment with smaller form-factor
Reduced Part Count | Cost savings passed to our customers (-$100)
Lighter Weight | 12% reduction

SmartCarbs are proudly designed and manufactured in the USA!

Learn more about How It Works

Performance Guarantees

Less Is More

The SC3’s patented CloudForge™ venturi airflow shaping, integrated float bowl venting, and single circuit, metering-rod-only fueling all work together to provide superior performance and efficiency at every throttle position compared to competing fuel systems. No jets, no secondary circuits, and no compromises.

8-10% More HP & Torque | Compared to fully tuned jet/needle carburetors size-for-size
25-30% Greater Fuel Economy | Forget the oversized tank or pair one up for ultimate range
30-50% Less Emissions Outputs | 3X EPA certified for on-road emissions
Incredibly Crisp, Clean Throttle Response | Increased torque/tractability & substantial peak RPM overrev
Ships Pre-Tuned | Every SC3 SmartCarb ships pre-adjusted specifically for your Husqvarna TE 250

Ultimate Simplicity

Everything You Need, Nothing You Don’t

While competing fuel systems continue down the path of ever-increasing complexity by adding power-jets, additional circuits, and adjustment knobs, the SmartCarb SC3 takes a different approach. Our patented single circuit design makes the SC3 the easiest carburetor on the planet to tune and maintain.

Tool-Free Tuning in Seconds | SC3 offers the finest adjustment resolution of any carburetor, right at your fingertips
Set and Forget | Automatic air density compensation for elevation, temperature, and even blow-thru boost
No Jets or Jetting | Trash the brass and leave jetting behind
Stop Getting Hosed | Super clean form-factor with integrated float bowl venting – NO dangly hoses
Less is More | Smallest part count of any carburetor on the market
Mean AND Green | Zero fuel spillage, even when tipped over

Fitment Information

This SmartCarb accepts the stock throttle cable and equips the following 250cc Husqvarna 2-stroke dirt bikes:

2014-2018 TE 250
2000-2013 WR 250

An airboot trim IS REQUIRED for proper SmartCarb float bowl venting. The factory airboot has an in-molded rubber lip that can block the SmartCarb’s vent scoop, negatively affecting air density compensation and fuel flow assist at higher throttle positions. No obstruction is permissible. Trimming may be performed during installation with an x-acto knife or a dremel tool.

View the Quick Start Guide (included with your purchase).

SmartCarb For Husqvarna TE/WR 250

Sharp lines and a smart design ethos. We fit right in!

Description

What’s New!

Performance Guarantees

Less Is More

Ultimate Simplicity

Everything You Need, Nothing You Don’t

Fitment Information

Reviews

STAY TUNED

Address

Phone

Support

Hours

Follow Us

General